Ergon Asphalt & Emulsions, Inc. Lawton, OK

Facility Information

Facility Manager:

Rick Mann


Facility Telephone:

(580) 536-0098


Facility Fax:

(580) 536-0098



Facility Address:

9301 SW Koch St
Lawton, OK 73505-9693


Sales Manager:

Johnny Roe


Sales Telephone:

(405) 595-9073


Sales Office Fax:

(580) 223-9657



Sales Office Address:

2500 Refinery Rd
Ardmore,OK 73401-1669



Need technical support?

Click here.

Available Products

Click Treatment Description Products
Spray Paver Application A paving technique whereby the tack or bond coat material is applied through the paving equipment in a continuous operation. Contact your local salesperson for information on availability in your area. CRS-1S
Tack Coat - Conventional A tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure. SS-1
Chip Seal - Conventional A spray-applied application of asphalt emulsion followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5 - 7 years are typical. CRS-2
Chip Seal - Modified A wearing course of spray-applied polymer modified asphalt emulsion followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and preserve roadways. The modification provides resistance to higher ADT routes and provides for a relatively quick return to traffic. Life extensions of 6 - 7 years are seen. CRS-2+, CRS-2P, CRS-2S
Chip Seal - Premium A polymer modified chip seal system designed for maximum aggregate adhesion and the shortest return-to-traffic time for the highest ADT routes. Life extensions of 6 - 7 years are expected. CHFRS-2P
Rejuvenating Scrub Seal Surface treatment designed as a mass crack sealer with frictional properties of a chip seal. Used on roadways with high-density, top-down cracking as a wearing course or interlayer. Provides life extension of 6 - 7 years. CMS-1PC (eScrub), CMS-2P (eScrub)
Prime Coat - Conventional An application of emulsion or asphalt binder to a soil base in preparation for the wearing course. Typical use is prior to a chip seal or hot mixed asphalt application; the prime provides protection of the soil against rainfall in staged construction and serves as a bond promoter for the eventual surface. Prime coats are also used as a curing seal for cement-treated bases. AE-P
Click Treatment Description Products

Can’t find what you’re looking for?

Give us a call and we’ll steer you in the right direction for the on-spec product/treatment that meets your specific road needs.