Ergon Inc.
Ergon Asphalt & Emulsions, Inc. Roanoke, VA
Ergon Asphalt & Emulsions, Inc. Roanoke, VA
2677 Roanoke Avenue
Roanoke, VA 24027
Facility Information
Facility Manager: Kyle Redenbaugh
Facility Telephone: 512-987-3702
Facility Address:
2677 Roanoke Avenue
Roanoke, VA 24027
Facility Telephone: 512-987-3702
Facility Address:
2677 Roanoke Avenue
Roanoke, VA 24027
Sales Manager: Danny Moran
Sales Telephone: (540) 529-7247
Sales Office Address: 110 Franklin Rd SE, 9th Floor
Sales Telephone: (540) 529-7247
Sales Office Address: 110 Franklin Rd SE, 9th Floor
Can't find what you're looking for?
Give us a call and we’ll steer you in the right direction for the on-spec product/treatment that meets your specific road needs.
Need technical support? Click here.
Available Products
Click TreatmentDescriptionProducts
Bond Coat/Tack Coat - TracklessA trackless bond or tack coat is an application of emulsion or asphalt binder with trackless properties that is sprayed onto the roadway surface immediately prior to a paving operation. The trackless properties ensure the bonding material stays where it is needed, resisting being picked up by tires, paving equipment and haul trucks and tracked across the job site. Adjacent structures and striping are protected for tracking associated with conventional materials.BC-1HT
Chip Seal - ConventionalA spray-applied application of asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5-7 years are typical.HFE-90, CRS-1H, CRS-2, CRS-2H, CMS-2, CMS-2P (eScrub)
Chip Seal - ModifiedA wearing course of spray-applied polymer modified asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and preserve roadways. The modification provides resistance to higher ADT routes and provides for a relatively quick return to traffic. Life extensions of 6-7 years are seen.RS-1HM, HFE-100P, LMCRS-2H, PMCRS-2H, RS-1M, CRS-2S, CRS-1HM, CRS-1HP, CRS-2+, CRS-2HLM, CRS-2HP, CRS-2L, CRS-2P
Prime Coat - ConventionalAn application of emulsion or asphalt binder to a soil base in preparation for the wearing course. Typical use is prior to a chip seal or hot mixed asphalt application; the prime provides protection of the soil against rainfall in staged construction and serves as a bond promoter for the eventual surface. Prime coats are also used as a curing seal for cement-treated bases.PEP, CPP-1, AE-P
Tack Coat - ConventionalA tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure.PET, CSS-1, CRS-1HBC, CQS-1HP, CBC-1H
Click TreatmentDescriptionProducts
