Ergon Inc.
Ergon Asphalt & Emulsions, Inc. Mulga, AL
Ergon Asphalt & Emulsions, Inc. Mulga, AL
7890 Birmingport Road
Mulga, AL 35118
Facility Information
Facility Manager: Bobby Cordell
Facility Telephone: (205) 436-3413
Facility Fax: (205) 436-3404
Facility Address:
7890 Birmingport Road
Mulga, AL 35118
Facility Telephone: (205) 436-3413
Facility Fax: (205) 436-3404
Facility Address:
7890 Birmingport Road
Mulga, AL 35118
Sales Manager: Trae Strain
Sales Telephone: (256) 283-9332
Sales Office Fax: (205) 436-3404
Sales Telephone: (256) 283-9332
Sales Office Fax: (205) 436-3404
Can't find what you're looking for?
Give us a call and we’ll steer you in the right direction for the on-spec product/treatment that meets your specific road needs.
Need technical support? Click here.
Available Products
Click TreatmentDescriptionProducts
Bond Coat/Tack Coat - TracklessA trackless bond or tack coat is an application of emulsion or asphalt binder with trackless properties that is sprayed onto the roadway surface immediately prior to a paving operation. The trackless properties ensure the bonding material stays where it is needed, resisting being picked up by tires, paving equipment and haul trucks and tracked across the job site. Adjacent structures and striping are protected for tracking associated with conventional materials.BC-1HT
Tack Coat - ConventionalA tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure.PET, CSS-1, CRS-1HBC, CQS-1HP, CBC-1H
Chip Seal - ConventionalA spray-applied application of asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5-7 years are typical.HFE-90, CRS-1H, CRS-2, CRS-2H, CMS-2, CMS-2P (eScrub)
Chip Seal - ModifiedA wearing course of spray-applied polymer modified asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and preserve roadways. The modification provides resistance to higher ADT routes and provides for a relatively quick return to traffic. Life extensions of 6-7 years are seen.RS-1HM, HFE-100P, LMCRS-2H, PMCRS-2H, RS-1M, CRS-2S, CRS-1HM, CRS-1HP, CRS-2+, CRS-2HLM, CRS-2HP, CRS-2L, CRS-2P
Rejuvenating Scrub SealSurface treatment designed as a mass crack sealer with frictional properties of a chip seal. Used on roadways with high-density, top-down cracking as a wearing course or interlayer. Provides life extension of 6-7 years.PMRE
Fog Seal - High-PerformanceA light application of emulsion sprayed on the roadway surface, providing a quick return-to-traffic time and improved aggregate retention with trackless properties. Typical uses are over new chip seals, rejuvenating scrub seals and existing pavement surfaces — resulting in increased service life of 2-4 years.
Fog Seal - RejuvenatingA preservation technique that involves spray applying a light application of a polymer modified asphalt emulsion containing a rejuvenator. Typically used to seal cracks 1/8 inch and smaller and to return original properties to the upper portion of an asphalt mixture. Life extensions of 2-4 years can be achieved.CMS-1PF (eFog)
Click TreatmentDescriptionProducts
