Ergon Asphalt & Emulsions, Inc. Corpus Christi, TX

Facility Information

Facility Manager:

Michael Magana


Facility Telephone:

(361) 289-6147


Facility Fax:

(361) 289-6147



Facility Address:

6746 Up River Road
Corpus Christi, TX 78409


Sales Manager:

Ernesto Santillan


Sales Telephone:

(361) 271-6465


Sales Office Fax:

(512) 469-0391



Sales Office Address:

11612 RM 2244
Building 1 Suite 250
Austin,TX 78738



Need technical support?

Click here.

Available Products

Click Treatment Description Products
Spray Paver Application A paving technique whereby the tack or bond coat material is applied through the paving equipment in a continuous operation. Contact your local salesperson for information on availability in your area. EBL
Tack Coat - Conventional A tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure. SS-1, SS-1H
Chip Seal - Conventional A spray-applied application of asphalt emulsion followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5 - 7 years are typical. CRS-2
Chip Seal - Modified A wearing course of spray-applied polymer modified asphalt emulsion followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and preserve roadways. The modification provides resistance to higher ADT routes and provides for a relatively quick return to traffic. Life extensions of 6 - 7 years are seen. CRS-2P, HFRS-2P
Fog Seal - Conventional A preservation technique that involves spraying a diluted asphalt emulsion onto an asphalt surface. Used to enhance aggregate retention and seal hairline cracks. Life extensions of 2 - 4 years are typical. SS-1, SS-1H
Prime Coat - Conventional An application of emulsion or asphalt binder to a soil base in preparation for the wearing course. Typical use is prior to a chip seal or hot mixed asphalt application; the prime provides protection of the soil against rainfall in staged construction and serves as a bond promoter for the eventual surface. Prime coats are also used as a curing seal for cement-treated bases. AE-P
Click Treatment Description Products