Ergon Asphalt & Emulsions, Inc. Boise, ID

Facility Information

Facility Manager:

Andy Heikkila


Facility Telephone:

(208) 345-2538


Facility Fax:



Facility Address:

4303 Gekeler Lane
Boise, ID 83716


Sales Manager:

Josh Giudice


Sales Telephone:

(208) 972-0353





Can’t find what you’re looking for?

Give us a call and we’ll steer you in the right direction for the on-spec product/treatment that meets your specific road needs.

Need technical support?

Click here.

Available Products

Click Treatment Description Products
Tack Coat - Conventional A tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure. CSS-1
Chip Seal - Conventional A spray-applied application of asphalt emulsion followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5 - 7 years are typical. HFE-150, CRS-2
Chip Seal - Conventional A spray-applied application of asphalt emulsion followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5 - 7 years are typical. HFE-150, CRS-2
Chip Seal - Modified A wearing course of spray-applied polymer modified asphalt emulsion followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and preserve roadways. The modification provides resistance to higher ADT routes and provides for a relatively quick return to traffic. Life extensions of 6 - 7 years are seen. LMCRS-2H, CRS-2P
Chip Seal - Premium A polymer modified chip seal system designed for maximum aggregate adhesion and the shortest return-to-traffic time for the highest ADT routes. Life extensions of 6 - 7 years are expected. CVRS-2P
Cold Mix - Conventional Mixture of cutback asphalt or asphalt emulsion and aggregate, combined through a pugmill or asphalt plant and typically stored in a stockpile for use as temporary patching. HFE-300, MC-250, MC-500, MC-800
Fog Seal - Specialty A fog seal treatment exhibiting a unique property such as a relatively quick return to traffic, a trackless cure or a polymer modified binder Quickseal
Micro Surfacing - Conventional Surface treatment/wearing course with standard 3% polymer modification of the asphalt base. Addresses loss of friction, oxidation rutting and minor reprofiling. Can be used on all roadway types and all traffic levels, providing 6 - 8 years of life extension. MSE
Slurry Seal - Conventional Wearing course with no modification to the binder. Used for county roads and city/residential streets, providing 5 - 7 years of life extension. CQS-1H
Slurry Seal - Modified Wearing course follows conventional slurry seal design and application techniques with added polymer modification of the asphalt base, typically around 1.5%. Addresses loss of friction, raveling and oxidation with a life extension of 4 - 6 years. CQS-1HP
Paving Grade Asphalt A wide range of asphalt cement used in the manufacturing of Hot Mix Asphalt. The asphalt binder may be modified and is designed with respect to climate and roadway structural requirements for traffic loading. Paving Grade Asphalt
Click Treatment Description Products