Ergon Asphalt & Emulsions, Inc. Fontana, CA

Facility Information

Facility Manager:

Hubert Romero


Facility Telephone:

(909) 829-0505


Facility Fax:

(909) 829-0505



Facility Address:

14929 Slover Avenue
Fontana, CA 92337


Sales Manager:

Todd Vargason


Sales Telephone:

(909) 559-4051


Sales Office Fax:

(909) 829-8074



Sales Office Address:

14929 Slover Avenue
Fontana, CA 92337



Sales Manager:

Tom Hicks


Sales Telephone:

(909) 265-5673


Sales Office Fax:

(909) 829-8074



Sales Office Address:

14929 Slover Avenue
Fontana,CA 92337



Can’t find what you’re looking for?

Give us a call and we’ll steer you in the right direction for the on-spec product/treatment that meets your specific road needs.

Need technical support?

Click here.

Available Products

Click Treatment Description Products
Tack Coat - Conventional A tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure. SS-1H
Spray Paver Application A paving technique whereby the tack or bond coat material is applied through the paving equipment in a continuous operation. Contact your local salesperson for information on availability in your area. BWC, PMEM
Chip Seal - Modified A wearing course of spray-applied polymer modified asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and preserve roadways. The modification provides resistance to higher ADT routes and provides for a relatively quick return to traffic. Life extensions of 6 - 7 years are seen. LMCRS-2H, PMCRS-2H
Rejuvenating Scrub Seal Surface treatment designed as a mass crack sealer with frictional properties of a chip seal. Used on roadways with high-density, top-down cracking as a wearing course or interlayer. Provides life extension of 6 - 7 years. CMS-1PC (eScrub), PMRE
Cold In-Place Recycling Rehabilitation technique. Mills and recycles asphalt mixtures to depths in the range of 3/4 - 2 inches. Used to correct all pavement distresses within the recycled depth and prevent or delay reflective cracking from deeper in the structure. CIR-EE
Full Depth Reclamation FDR is a complete rehabilitation technique addressing all major distresses throughout the pavement structure and into the base. All roadway materials are combined in-situ and compacted to form an improved base. This is followed by the appropriate wearing course of hot mix asphalt installed to provide the required structural coefficient. FDR-EE
Fog Seal - Conventional A preservation technique that involves spraying a diluted asphalt emulsion onto an asphalt surface. Used to enhance aggregate retention and seal hairline cracks. Life extensions of 2 - 4 years are typical. CQS-1H, SS-1H
Fog Seal - Rejuvenating A preservation technique that involves spray applying a light application of a polymer modified asphalt emulsion containing a rejuvenator. Typically used to seal cracks 1/8 inch and smaller and to return original properties to the upper portion of an asphalt mixture. Life extensions of 2 - 4 years can be achieved. CMS-1PF (eFog), PMRE QB
Fog Seal - Specialty A fog seal treatment exhibiting a unique property such as a relatively quick return to traffic, a trackless cure or a polymer modified binder. PMCQS-1H
Micro Surfacing - Conventional Surface treatment/wearing course with standard 3% polymer modification of the asphalt base. Addresses loss of friction, oxidation rutting and minor reprofiling. Can be used on all roadway types and all traffic levels, providing 6 - 8 years of life extension. MSE, CSS-1HP
Slurry Seal - Conventional Wearing course with no modification to the binder. Used for county roads and city/residential streets, providing 5 - 7 years of life extension. CQS-1H
Slurry Seal - Modified Wearing course follows conventional slurry seal design and application techniques with added polymer modification of the asphalt base, typically around 1.5%. Addresses loss of friction, raveling and oxidation with a life extension of 4 - 6 years. PMCQS-1H
Prime Coat - Solventless An ecologically friendly emulsion containing no petroleum solvents, providing a rapid cure that facilitates same-day paving. CPP-1 (ePrime)
Click Treatment Description Products