Ergon Inc.
Ergon Asphalt & Emulsions, Inc. Corpus Christi, TX
Facility Information
Facility Manager: Michael Magana
Facility Telephone: (361) 289-6147
Facility Fax: (361) 289-6147
Facility Address:6746 Up River Road Corpus Christi, TX 78409
Sales Manager: Ernesto Santillan
Sales Telephone:
Sales Office Fax: (512) 469-0391
Sales Office Address:11612 RM 2244
Building 1 Suite 250
Austin, TX 78738
Need technical support?
Click here.
Available Products
Click Treatment
Description
Products
Tack Coat - Conventional
A tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure.
SS-1, SS-1H
Spray Paver Application
A paving technique whereby the tack or bond coat material is applied through the paving equipment in a continuous operation. Contact your local salesperson for information on availability in your area.
EBL
Chip Seal - Conventional
A spray-applied application of asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5-7 years are typical.
CRS-2, HFRS-2
Chip Seal - Modified
A wearing course of spray-applied polymer modified asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and preserve roadways. The modification provides resistance to higher ADT routes and provides for a relatively quick return to traffic. Life extensions of 6-7 years are seen.
CRS-2P, HFRS-2P
Fog Seal - Conventional
A preservation technique that involves spraying a diluted asphalt emulsion onto an asphalt surface. Used to enhance aggregate retention and seal hairline cracks. Life extensions of 1-2 years are typical.
SS-1, SS-1H
Prime Coat - Conventional
An application of emulsion or asphalt binder to a soil base in preparation for the wearing course. Typical use is prior to a chip seal or hot mixed asphalt application; the prime provides protection of the soil against rainfall in staged construction and serves as a bond promoter for the eventual surface. Prime coats are also used as a curing seal for cement-treated bases.
AE-P
Click Treatment
Description
Products
Can’t find what you’re looking for?
Give us a call and we’ll steer you in the right direction for the on-spec product/treatment that meets your specific road needs.
Facility Manager:
Michael Magana
Facility Telephone:(361) 289-6147
Facility Fax:(361) 289-6147
Facility Address:6746 Up River Road Corpus Christi, TX 78409
Sales Manager:
Ernesto Santillan
Sales Telephone: Sales Office Fax:(512) 469-0391
Sales Office Address:11612 RM 2244
Building 1 Suite 250
Austin, TX 78738
Need technical support?
Click here.
Available Products
| Click Treatment | Description | Products |
|---|---|---|
| Tack Coat - Conventional | A tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure. | SS-1, SS-1H |
| Spray Paver Application | A paving technique whereby the tack or bond coat material is applied through the paving equipment in a continuous operation. Contact your local salesperson for information on availability in your area. | EBL |
| Chip Seal - Conventional | A spray-applied application of asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5-7 years are typical. | CRS-2, HFRS-2 |
| Chip Seal - Modified | A wearing course of spray-applied polymer modified asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and preserve roadways. The modification provides resistance to higher ADT routes and provides for a relatively quick return to traffic. Life extensions of 6-7 years are seen. | CRS-2P, HFRS-2P |
| Fog Seal - Conventional | A preservation technique that involves spraying a diluted asphalt emulsion onto an asphalt surface. Used to enhance aggregate retention and seal hairline cracks. Life extensions of 1-2 years are typical. | SS-1, SS-1H |
| Prime Coat - Conventional | An application of emulsion or asphalt binder to a soil base in preparation for the wearing course. Typical use is prior to a chip seal or hot mixed asphalt application; the prime provides protection of the soil against rainfall in staged construction and serves as a bond promoter for the eventual surface. Prime coats are also used as a curing seal for cement-treated bases. | AE-P |
| Click Treatment | Description | Products |
Can’t find what you’re looking for?
Give us a call and we’ll steer you in the right direction for the on-spec product/treatment that meets your specific road needs.