Ergon Inc.
Ergon Asphalt & Emulsions, Inc. Vicksburg, MS
Facility Information
Facility Manager: John Harrigill
Facility Telephone: (601) 529-9905
Facility Fax: (601) 630-8343
Facility Address:2611 Haining Road Vicksburg, MS 39183-9056
Sales Manager: Mark Hartman
Sales Telephone:
Sales Office Fax: (601) 933-3363
Sales Office Address:730 Carter Street
Centreville , MS 39631
Sales Manager: Amy Walker
Sales Telephone:
Cell Phone: (601) 497-7278
Sales Office Address: P.O. Box 1639
Jackson, MS 39215-1639
Need technical support?
Click here.
Available Products
Click Treatment
Description
Products
Bond Coat/Tack Coat - Trackless
A trackless bond or tack coat is an application of emulsion or asphalt binder with trackless properties that is sprayed onto the roadway surface immediately prior to a paving operation. The trackless properties ensure the bonding material stays where it is needed, resisting being picked up by tires, paving equipment and haul trucks and tracked across the job site. Adjacent structures and striping are protected for tracking associated with conventional materials.
BC-HT (eTac)
Tack Coat - Conventional
A tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure.
CSS-1
Spray Paver Application
A paving technique whereby the tack or bond coat material is applied through the paving equipment in a continuous operation. Contact your local salesperson for information on availability in your area.
PET
Chip Seal - Conventional
A spray-applied application of asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5-7 years are typical.
CRS-2
Chip Seal - Modified
A wearing course of spray-applied polymer modified asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and preserve roadways. The modification provides resistance to higher ADT routes and provides for a relatively quick return to traffic. Life extensions of 6-7 years are seen.
CRS-2P
Rejuvenating Scrub Seal
Surface treatment designed as a mass crack sealer with frictional properties of a chip seal. Used on roadways with high-density, top-down cracking as a wearing course or interlayer. Provides life extension of 6-7 years.
CMS-1PC (eScrub)
Fog Seal - High-Performance
A light application of emulsion sprayed on the roadway surface, providing a quick return-to-traffic time and improved aggregate retention with trackless properties. Typical uses are over new chip seals, rejuvenating scrub seals and existing pavement surfaces — resulting in increased service life of 2-4 years.
CHPF-1 (eFog HP)
Fog Seal - Rejuvenating
A preservation technique that involves spray applying a light application of a polymer modified asphalt emulsion containing a rejuvenator. Typically used to seal cracks 1/8 inch and smaller and to return original properties to the upper portion of an asphalt mixture. Life extensions of 2-4 years can be achieved.
CMS-1PF (eFog)
Micro Surfacing - Conventional
Surface treatment/wearing course with standard 3% polymer modification of the asphalt base. Addresses loss of friction, oxidation rutting and minor reprofiling. Can be used on all roadway types and all traffic levels, providing 6-8 years of life extension.
CSS-1HP
Micro Surfacing - Premium
Surface treatment/wearing course with minimum 6% polymer modification of the asphalt base. Developed for use on all roadway classifications. Uses include rut filling and leveling. It also provides durable friction while resisting damage from snowplows. Typical life extension of 7-9 years.
CSS-1EP (eFlex)
Slurry Seal - Conventional
Wearing course with no modification to the binder. Used for county roads and city/residential streets, providing 5-7 years of life extension.
CQS-1H
Slurry Seal - Premium
Surface treatment/wearing course with minimum 6% polymer modification of the asphalt base and upgraded performance mixture design over the conventional version. Developed for use in city environments where heavy turning, street-side parking are prevalent, as well as in frequent snowplow zones. Protects against vehicular damage early in the curing process and increases durability providing life extension of 7-9 years.
CQS-1EP
Paving Grade Asphalt
A wide range of asphalt cement used in the manufacturing of Hot Mix Asphalt. The asphalt binder may be modified and is designed with respect to climate and roadway structural requirements for traffic loading.
Click Treatment
Description
Products
Can’t find what you’re looking for?
Give us a call and we’ll steer you in the right direction for the on-spec product/treatment that meets your specific road needs.
Facility Manager:
John Harrigill
Facility Telephone:(601) 529-9905
Facility Fax:(601) 630-8343
Facility Address:2611 Haining Road Vicksburg, MS 39183-9056
Sales Manager:
Mark Hartman
Sales Telephone: Sales Office Fax:(601) 933-3363
Sales Office Address:730 Carter Street
Centreville , MS 39631
Amy Walker
Sales Telephone: Cell Phone:(601) 497-7278
Sales Office Address: P.O. Box 1639
Jackson, MS 39215-1639
Need technical support?
Click here.
Available Products
| Click Treatment | Description | Products |
|---|---|---|
| Bond Coat/Tack Coat - Trackless | A trackless bond or tack coat is an application of emulsion or asphalt binder with trackless properties that is sprayed onto the roadway surface immediately prior to a paving operation. The trackless properties ensure the bonding material stays where it is needed, resisting being picked up by tires, paving equipment and haul trucks and tracked across the job site. Adjacent structures and striping are protected for tracking associated with conventional materials. | BC-HT (eTac) |
| Tack Coat - Conventional | A tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure. | CSS-1 |
| Spray Paver Application | A paving technique whereby the tack or bond coat material is applied through the paving equipment in a continuous operation. Contact your local salesperson for information on availability in your area. | PET |
| Chip Seal - Conventional | A spray-applied application of asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5-7 years are typical. | CRS-2 |
| Chip Seal - Modified | A wearing course of spray-applied polymer modified asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and preserve roadways. The modification provides resistance to higher ADT routes and provides for a relatively quick return to traffic. Life extensions of 6-7 years are seen. | CRS-2P |
| Rejuvenating Scrub Seal | Surface treatment designed as a mass crack sealer with frictional properties of a chip seal. Used on roadways with high-density, top-down cracking as a wearing course or interlayer. Provides life extension of 6-7 years. | CMS-1PC (eScrub) |
| Fog Seal - High-Performance | A light application of emulsion sprayed on the roadway surface, providing a quick return-to-traffic time and improved aggregate retention with trackless properties. Typical uses are over new chip seals, rejuvenating scrub seals and existing pavement surfaces — resulting in increased service life of 2-4 years. | CHPF-1 (eFog HP) |
| Fog Seal - Rejuvenating | A preservation technique that involves spray applying a light application of a polymer modified asphalt emulsion containing a rejuvenator. Typically used to seal cracks 1/8 inch and smaller and to return original properties to the upper portion of an asphalt mixture. Life extensions of 2-4 years can be achieved. | CMS-1PF (eFog) |
| Micro Surfacing - Conventional | Surface treatment/wearing course with standard 3% polymer modification of the asphalt base. Addresses loss of friction, oxidation rutting and minor reprofiling. Can be used on all roadway types and all traffic levels, providing 6-8 years of life extension. | CSS-1HP |
| Micro Surfacing - Premium | Surface treatment/wearing course with minimum 6% polymer modification of the asphalt base. Developed for use on all roadway classifications. Uses include rut filling and leveling. It also provides durable friction while resisting damage from snowplows. Typical life extension of 7-9 years. | CSS-1EP (eFlex) |
| Slurry Seal - Conventional | Wearing course with no modification to the binder. Used for county roads and city/residential streets, providing 5-7 years of life extension. | CQS-1H |
| Slurry Seal - Premium | Surface treatment/wearing course with minimum 6% polymer modification of the asphalt base and upgraded performance mixture design over the conventional version. Developed for use in city environments where heavy turning, street-side parking are prevalent, as well as in frequent snowplow zones. Protects against vehicular damage early in the curing process and increases durability providing life extension of 7-9 years. | CQS-1EP |
| Paving Grade Asphalt | A wide range of asphalt cement used in the manufacturing of Hot Mix Asphalt. The asphalt binder may be modified and is designed with respect to climate and roadway structural requirements for traffic loading. | |
| Click Treatment | Description | Products |
Can’t find what you’re looking for?
Give us a call and we’ll steer you in the right direction for the on-spec product/treatment that meets your specific road needs.