Ergon Inc.
Ergon Asphalt & Emulsions, Inc. Columbia, TN
Facility Information
Facility Manager: Tom Kajitani
Facility Telephone: (931) 325-5400
Facility Fax: (931) 325-5400
Facility Address:1251 North Main Street Mt. Pleasant, TN 38474-1072
Sales Manager: Mark Clark
Sales Telephone:
Sales Office Fax: (731) 847-2315
Sales Office Address:5445 HWY 412 East
Parsons, TN 38363-3641
Need technical support?
Click here.
Available Products
Click Treatment
Description
Products
Bond Coat/Tack Coat - Trackless
A trackless bond or tack coat is an application of emulsion or asphalt binder with trackless properties that is sprayed onto the roadway surface immediately prior to a paving operation. The trackless properties ensure the bonding material stays where it is needed, resisting being picked up by tires, paving equipment and haul trucks and tracked across the job site. Adjacent structures and striping are protected for tracking associated with conventional materials.
BC-HT (eTac)
Tack Coat - Conventional
A tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure.
SS-1, SS-1H
Chip Seal - Conventional
A spray-applied application of asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5-7 years are typical.
CRS-2, RS-2
Chip Seal - Modified
A wearing course of spray-applied polymer modified asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and preserve roadways. The modification provides resistance to higher ADT routes and provides for a relatively quick return to traffic. Life extensions of 6-7 years are seen.
CRS-2P
Rejuvenating Scrub Seal
Surface treatment designed as a mass crack sealer with frictional properties of a chip seal. Used on roadways with high-density, top-down cracking as a wearing course or interlayer. Provides life extension of 6-7 years.
CMS-1PC (eScrub)
Cold Mix - Conventional
Mixture of cutback asphalt or asphalt emulsion and aggregate, combined through a pugmill or asphalt plant and typically stored in a stockpile for use as temporary patching.
RM-90 (ePatch)
Fog Seal - High-Performance
A light application of emulsion sprayed on the roadway surface, providing a quick return-to-traffic time and improved aggregate retention with trackless properties. Typical uses are over new chip seals, rejuvenating scrub seals and existing pavement surfaces — resulting in increased service life of 2-4 years.
CHPF-1 (eFog HP)
Fog Seal - Rejuvenating
A preservation technique that involves spray applying a light application of a polymer modified asphalt emulsion containing a rejuvenator. Typically used to seal cracks 1/8 inch and smaller and to return original properties to the upper portion of an asphalt mixture. Life extensions of 2-4 years can be achieved.
CMS-1PF (eFog)
Micro Surfacing - Conventional
Surface treatment/wearing course with standard 3% polymer modification of the asphalt base. Addresses loss of friction, oxidation rutting and minor reprofiling. Can be used on all roadway types and all traffic levels, providing 6-8 years of life extension.
CQS-1HP, CQS-1H
Slurry Seal - Conventional
Wearing course with no modification to the binder. Used for county roads and city/residential streets, providing 5-7 years of life extension.
CQS-1H
Click Treatment
Description
Products
Can’t find what you’re looking for?
Give us a call and we’ll steer you in the right direction for the on-spec product/treatment that meets your specific road needs.
Facility Manager:
Tom Kajitani
Facility Telephone:(931) 325-5400
Facility Fax:(931) 325-5400
Facility Address:1251 North Main Street Mt. Pleasant, TN 38474-1072
Sales Manager:
Mark Clark
Sales Telephone: Sales Office Fax:(731) 847-2315
Sales Office Address:5445 HWY 412 East
Parsons, TN 38363-3641
Need technical support?
Click here.
Available Products
| Click Treatment | Description | Products |
|---|---|---|
| Bond Coat/Tack Coat - Trackless | A trackless bond or tack coat is an application of emulsion or asphalt binder with trackless properties that is sprayed onto the roadway surface immediately prior to a paving operation. The trackless properties ensure the bonding material stays where it is needed, resisting being picked up by tires, paving equipment and haul trucks and tracked across the job site. Adjacent structures and striping are protected for tracking associated with conventional materials. | BC-HT (eTac) |
| Tack Coat - Conventional | A tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure. | SS-1, SS-1H |
| Chip Seal - Conventional | A spray-applied application of asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5-7 years are typical. | CRS-2, RS-2 |
| Chip Seal - Modified | A wearing course of spray-applied polymer modified asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and preserve roadways. The modification provides resistance to higher ADT routes and provides for a relatively quick return to traffic. Life extensions of 6-7 years are seen. | CRS-2P |
| Rejuvenating Scrub Seal | Surface treatment designed as a mass crack sealer with frictional properties of a chip seal. Used on roadways with high-density, top-down cracking as a wearing course or interlayer. Provides life extension of 6-7 years. | CMS-1PC (eScrub) |
| Cold Mix - Conventional | Mixture of cutback asphalt or asphalt emulsion and aggregate, combined through a pugmill or asphalt plant and typically stored in a stockpile for use as temporary patching. | RM-90 (ePatch) |
| Fog Seal - High-Performance | A light application of emulsion sprayed on the roadway surface, providing a quick return-to-traffic time and improved aggregate retention with trackless properties. Typical uses are over new chip seals, rejuvenating scrub seals and existing pavement surfaces — resulting in increased service life of 2-4 years. | CHPF-1 (eFog HP) |
| Fog Seal - Rejuvenating | A preservation technique that involves spray applying a light application of a polymer modified asphalt emulsion containing a rejuvenator. Typically used to seal cracks 1/8 inch and smaller and to return original properties to the upper portion of an asphalt mixture. Life extensions of 2-4 years can be achieved. | CMS-1PF (eFog) |
| Micro Surfacing - Conventional | Surface treatment/wearing course with standard 3% polymer modification of the asphalt base. Addresses loss of friction, oxidation rutting and minor reprofiling. Can be used on all roadway types and all traffic levels, providing 6-8 years of life extension. | CQS-1HP, CQS-1H |
| Slurry Seal - Conventional | Wearing course with no modification to the binder. Used for county roads and city/residential streets, providing 5-7 years of life extension. | CQS-1H |
| Click Treatment | Description | Products |
Can’t find what you’re looking for?
Give us a call and we’ll steer you in the right direction for the on-spec product/treatment that meets your specific road needs.