Ergon Inc.
Ergon Asphalt & Emulsions, Inc. Ardmore, OK
Facility Information
Facility Manager: Kelley Smith
Facility Telephone: (580) 223-8010
Facility Fax: (580) 223-8010
Facility Address:2500 Refinery Rd Ardmore, OK 73401-1669
Sales Manager: Johnny Roe
Sales Telephone: (405) 595-9073
Sales Office Fax: (580) 223-9657
Sales Office Address:2500 Refinery Rd
Ardmore, OK 73401-1669
Sales Manager: Wendell Nolan
Sales Telephone: (918) 408-0845
Sales Office Address: 2500 Refinery Rd
Ardmore, OK 73401-8010
Need technical support?
Click here.
Available Products
Click Treatment
Description
Products
Tack Coat - Conventional
A tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure.
SS-1
Chip Seal - Conventional
A spray-applied application of asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5-7 years are typical.
CRS-2
Chip Seal - Modified
A wearing course of spray-applied polymer modified asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and preserve roadways. The modification provides resistance to higher ADT routes and provides for a relatively quick return to traffic. Life extensions of 6-7 years are seen.
CRS-2+
Prime Coat - Conventional
An application of emulsion or asphalt binder to a soil base in preparation for the wearing course. Typical use is prior to a chip seal or hot mixed asphalt application; the prime provides protection of the soil against rainfall in staged construction and serves as a bond promoter for the eventual surface. Prime coats are also used as a curing seal for cement-treated bases.
AE-P
Click Treatment
Description
Products
Can’t find what you’re looking for?
Give us a call and we’ll steer you in the right direction for the on-spec product/treatment that meets your specific road needs.
Facility Manager:
Kelley Smith
Facility Telephone:(580) 223-8010
Facility Fax:(580) 223-8010
Facility Address:2500 Refinery Rd Ardmore, OK 73401-1669
Sales Manager:
Johnny Roe
Sales Telephone:(405) 595-9073
Sales Office Fax:(580) 223-9657
Sales Office Address:2500 Refinery Rd
Ardmore, OK 73401-1669
Wendell Nolan
Sales Telephone:(918) 408-0845
Sales Office Address: 2500 Refinery Rd
Ardmore, OK 73401-8010
Need technical support?
Click here.
Available Products
| Click Treatment | Description | Products |
|---|---|---|
| Tack Coat - Conventional | A tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure. | SS-1 |
| Chip Seal - Conventional | A spray-applied application of asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5-7 years are typical. | CRS-2 |
| Chip Seal - Modified | A wearing course of spray-applied polymer modified asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and preserve roadways. The modification provides resistance to higher ADT routes and provides for a relatively quick return to traffic. Life extensions of 6-7 years are seen. | CRS-2+ |
| Prime Coat - Conventional | An application of emulsion or asphalt binder to a soil base in preparation for the wearing course. Typical use is prior to a chip seal or hot mixed asphalt application; the prime provides protection of the soil against rainfall in staged construction and serves as a bond promoter for the eventual surface. Prime coats are also used as a curing seal for cement-treated bases. | AE-P |
| Click Treatment | Description | Products |
Can’t find what you’re looking for?
Give us a call and we’ll steer you in the right direction for the on-spec product/treatment that meets your specific road needs.