Ergon Inc.
Ergon Asphalt & Emulsions, Inc. Tampa, FL
Facility Information
Facility Manager: David Lind
Facility Telephone: (813) 574-8340
Facility Fax: (813) 574-8340
Facility Address:5201 Causeway Boulevard Tampa, FL 33619-6125
Sales Manager: Joey Gelwix
Sales Telephone: (813) 695-0345
Sales Office Address: 5201 Causeway Boulevard
Tampa, FL 33619-6125
Need technical support?
Click here.
Available Products
Click Treatment
Description
Products
Bond Coat/Tack Coat - Trackless
A trackless bond or tack coat is an application of emulsion or asphalt binder with trackless properties that is sprayed onto the roadway surface immediately prior to a paving operation. The trackless properties ensure the bonding material stays where it is needed, resisting being picked up by tires, paving equipment and haul trucks and tracked across the job site. Adjacent structures and striping are protected for tracking associated with conventional materials.
BC-HT (eTac)
Tack Coat - Conventional
A tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure.
CSS-1
Spray Paver Application
A paving technique whereby the tack or bond coat material is applied through the paving equipment in a continuous operation. Contact your local salesperson for information on availability in your area.
PET
Chip Seal - Conventional
A spray-applied application of asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5-7 years are typical.
CRS-2
Chip Seal - Modified
A wearing course of spray-applied polymer modified asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and preserve roadways. The modification provides resistance to higher ADT routes and provides for a relatively quick return to traffic. Life extensions of 6-7 years are seen.
CRS-2P
Rejuvenating Scrub Seal
Surface treatment designed as a mass crack sealer with frictional properties of a chip seal. Used on roadways with high-density, top-down cracking as a wearing course or interlayer. Provides life extension of 6-7 years.
CMS-1PC (eScrub)
Cold Mix - Premium
Laboratory designed mixture of an engineered asphalt or asphalt emulsion binder combined through an asphalt plant or pugmill that is capable of being stored in a stockpile for use as a durable repair of potholes, leveling and cold paving
RM-90 (ePatch)
Fog Seal - Rejuvenating
A preservation technique that involves spray applying a light application of a polymer modified asphalt emulsion containing a rejuvenator. Typically used to seal cracks 1/8 inch and smaller and to return original properties to the upper portion of an asphalt mixture. Life extensions of 2-4 years can be achieved.
CMS-1PF (eFog)
Micro Surfacing - Conventional
Surface treatment/wearing course with standard 3% polymer modification of the asphalt base. Addresses loss of friction, oxidation rutting and minor reprofiling. Can be used on all roadway types and all traffic levels, providing 6-8 years of life extension.
CSS-1HP
Micro Surfacing - Premium
Surface treatment/wearing course with minimum 6% polymer modification of the asphalt base. Developed for use on all roadway classifications. Uses include rut filling and leveling. It also provides durable friction while resisting damage from snowplows. Typical life extension of 7-9 years.
CSS-1EP (eFlex)
Slurry Seal - Conventional
Wearing course with no modification to the binder. Used for county roads and city/residential streets, providing 5-7 years of life extension.
CQS-1H
Slurry Seal - Premium
Surface treatment/wearing course with minimum 6% polymer modification of the asphalt base and upgraded performance mixture design over the conventional version. Developed for use in city environments where heavy turning, street-side parking are prevalent, as well as in frequent snowplow zones. Protects against vehicular damage early in the curing process and increases durability providing life extension of 7-9 years.
CQS-1EP, eFlex ES
Prime Coat - Solventless
An ecologically friendly emulsion containing no petroleum solvents, providing a rapid cure that facilitates same-day paving.
ePrime
Click Treatment
Description
Products
Can’t find what you’re looking for?
Give us a call and we’ll steer you in the right direction for the on-spec product/treatment that meets your specific road needs.
Facility Manager:
David Lind
Facility Telephone:(813) 574-8340
Facility Fax:(813) 574-8340
Facility Address:5201 Causeway Boulevard Tampa, FL 33619-6125
Sales Manager:
Joey Gelwix
Sales Telephone:(813) 695-0345
Sales Office Address: 5201 Causeway Boulevard
Tampa, FL 33619-6125
Need technical support?
Click here.
Available Products
| Click Treatment | Description | Products |
|---|---|---|
| Bond Coat/Tack Coat - Trackless | A trackless bond or tack coat is an application of emulsion or asphalt binder with trackless properties that is sprayed onto the roadway surface immediately prior to a paving operation. The trackless properties ensure the bonding material stays where it is needed, resisting being picked up by tires, paving equipment and haul trucks and tracked across the job site. Adjacent structures and striping are protected for tracking associated with conventional materials. | BC-HT (eTac) |
| Tack Coat - Conventional | A tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure. | CSS-1 |
| Spray Paver Application | A paving technique whereby the tack or bond coat material is applied through the paving equipment in a continuous operation. Contact your local salesperson for information on availability in your area. | PET |
| Chip Seal - Conventional | A spray-applied application of asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5-7 years are typical. | CRS-2 |
| Chip Seal - Modified | A wearing course of spray-applied polymer modified asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and preserve roadways. The modification provides resistance to higher ADT routes and provides for a relatively quick return to traffic. Life extensions of 6-7 years are seen. | CRS-2P |
| Rejuvenating Scrub Seal | Surface treatment designed as a mass crack sealer with frictional properties of a chip seal. Used on roadways with high-density, top-down cracking as a wearing course or interlayer. Provides life extension of 6-7 years. | CMS-1PC (eScrub) |
| Cold Mix - Premium | Laboratory designed mixture of an engineered asphalt or asphalt emulsion binder combined through an asphalt plant or pugmill that is capable of being stored in a stockpile for use as a durable repair of potholes, leveling and cold paving | RM-90 (ePatch) |
| Fog Seal - Rejuvenating | A preservation technique that involves spray applying a light application of a polymer modified asphalt emulsion containing a rejuvenator. Typically used to seal cracks 1/8 inch and smaller and to return original properties to the upper portion of an asphalt mixture. Life extensions of 2-4 years can be achieved. | CMS-1PF (eFog) |
| Micro Surfacing - Conventional | Surface treatment/wearing course with standard 3% polymer modification of the asphalt base. Addresses loss of friction, oxidation rutting and minor reprofiling. Can be used on all roadway types and all traffic levels, providing 6-8 years of life extension. | CSS-1HP |
| Micro Surfacing - Premium | Surface treatment/wearing course with minimum 6% polymer modification of the asphalt base. Developed for use on all roadway classifications. Uses include rut filling and leveling. It also provides durable friction while resisting damage from snowplows. Typical life extension of 7-9 years. | CSS-1EP (eFlex) |
| Slurry Seal - Conventional | Wearing course with no modification to the binder. Used for county roads and city/residential streets, providing 5-7 years of life extension. | CQS-1H |
| Slurry Seal - Premium | Surface treatment/wearing course with minimum 6% polymer modification of the asphalt base and upgraded performance mixture design over the conventional version. Developed for use in city environments where heavy turning, street-side parking are prevalent, as well as in frequent snowplow zones. Protects against vehicular damage early in the curing process and increases durability providing life extension of 7-9 years. | CQS-1EP, eFlex ES |
| Prime Coat - Solventless | An ecologically friendly emulsion containing no petroleum solvents, providing a rapid cure that facilitates same-day paving. | ePrime |
| Click Treatment | Description | Products |
Can’t find what you’re looking for?
Give us a call and we’ll steer you in the right direction for the on-spec product/treatment that meets your specific road needs.