Ergon Inc.
Ergon Asphalt & Emulsions, Inc. Mount Pleasant, TX
Ergon Asphalt & Emulsions, Inc. Mount Pleasant, TX
209 Robert Nance Road
Mount Pleasant, TX 75455
Facility Information
Facility Manager: John Hallford
Facility Telephone: (903) 572-9839
Facility Address:
209 Robert Nance Road
Mount Pleasant, TX 75455
Facility Telephone: (903) 572-9839
Facility Address:
209 Robert Nance Road
Mount Pleasant, TX 75455
Sales Manager: Cody Fuller
Sales Telephone: 903-296-1728
Sales Office Address: 209 Robert Nance Road
Sales Manager: Travis King
Sales Telephone: 903-520-8728
Sales Office Address: 209 Robert Nance Road
Sales Telephone: 903-296-1728
Sales Office Address: 209 Robert Nance Road
Sales Manager: Travis King
Sales Telephone: 903-520-8728
Sales Office Address: 209 Robert Nance Road
Can't find what you're looking for?
Give us a call and we’ll steer you in the right direction for the on-spec product/treatment that meets your specific road needs.
Need technical support? Click here.
Available Products
Click TreatmentDescriptionProducts
Bond Coat/Tack Coat - TracklessA trackless bond or tack coat is an application of emulsion or asphalt binder with trackless properties that is sprayed onto the roadway surface immediately prior to a paving operation. The trackless properties ensure the bonding material stays where it is needed, resisting being picked up by tires, paving equipment and haul trucks and tracked across the job site. Adjacent structures and striping are protected for tracking associated with conventional materials.BC-1HT
Chip Seal - ConventionalA spray-applied application of asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5-7 years are typical.HFE-90, CRS-1H, CRS-2, CRS-2H, CMS-2, CMS-2P (eScrub)
Chip Seal - ModifiedA wearing course of spray-applied polymer modified asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and preserve roadways. The modification provides resistance to higher ADT routes and provides for a relatively quick return to traffic. Life extensions of 6-7 years are seen.RS-1HM, HFE-100P, LMCRS-2H, PMCRS-2H, RS-1M, CRS-2S, CRS-1HM, CRS-1HP, CRS-2+, CRS-2HLM, CRS-2HP, CRS-2L, CRS-2P
Cold Mix - ConventionalMixture of cutback asphalt or asphalt emulsion and aggregate, combined through a pugmill or asphalt plant and typically stored in a stockpile for use as temporary patching.HFE-300, RM-90 (ePatch), CMS-2S, AE-3 Modified, AES-300
Cold Mix - PremiumLaboratory designed mixture of an engineered asphalt or asphalt emulsion binder combined through an asphalt plant or pugmill that is capable of being stored in a stockpile for use as a durable repair of potholes, leveling and cold paving.
Fog Seal - ConventionalA preservation technique that involves spraying a diluted asphalt emulsion onto an asphalt surface. Used to enhance aggregate retention and seal hairline cracks. Life extensions of 1-2 years are typical.CMS-1P, MS-2, CSS-1S
Spray Paver ApplicationA paving technique whereby the tack or bond coat material is applied through the paving equipment in a continuous operation. Contact your local salesperson for information on availability in your area.PMEM, EBL, CRS-1S
Tack Coat - ConventionalA tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure.PET, CSS-1, CRS-1HBC, CQS-1HP, CBC-1H
Click TreatmentDescriptionProducts
