Ergon Inc.
Ergon Asphalt & Emulsions, Inc. Little Rock, AR
Ergon Asphalt & Emulsions, Inc. Little Rock, AR
601 Shamburger Lane
Little Rock, AR 72206
Facility Information
Facility Manager: Mark McGill
Facility Telephone: (501) 490-1451 Ext 3055
Facility Fax: (501) 490-1451 Ext 3055
Facility Address:
601 Shamburger Lane
Little Rock, AR 72206
Facility Telephone: (501) 490-1451 Ext 3055
Facility Fax: (501) 490-1451 Ext 3055
Facility Address:
601 Shamburger Lane
Little Rock, AR 72206
Sales Manager: Darryl Gardner
Sales Telephone: (501) 590-3145
Sales Office Fax: (501) 490-1021
Sales Office Address: 601 Shamburger Lane
Little Rock, AR 72206
Sales Manager: Gene Arnold
Sales Telephone: (901) 277-1700
Sales Office Address: 1989 Channel Avenue
Memphis,TN 38113
Sales Telephone: (501) 590-3145
Sales Office Fax: (501) 490-1021
Sales Office Address: 601 Shamburger Lane
Little Rock, AR 72206
Sales Manager: Gene Arnold
Sales Telephone: (901) 277-1700
Sales Office Address: 1989 Channel Avenue
Memphis,TN 38113
Can't find what you're looking for?
Give us a call and we’ll steer you in the right direction for the on-spec product/treatment that meets your specific road needs.
Need technical support? Click here.
Available Products
Click TreatmentDescriptionProducts
Bond Coat/Tack Coat - TracklessA trackless bond or tack coat is an application of emulsion or asphalt binder with trackless properties that is sprayed onto the roadway surface immediately prior to a paving operation. The trackless properties ensure the bonding material stays where it is needed, resisting being picked up by tires, paving equipment and haul trucks and tracked across the job site. Adjacent structures and striping are protected for tracking associated with conventional materials.BC-1HT
Chip Seal - ConventionalA spray-applied application of asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and reduce the intrusion of water into roadway structures. Typically used on more rural routes with low-to-moderate ADTs. Life extensions of 5-7 years are typical.HFE-90, CRS-1H, CRS-2, CRS-2H, CMS-2, CMS-2P (eScrub)
Chip Seal - ModifiedA wearing course of spray-applied polymer modified asphalt emulsion or binder followed by an application of a single layer of aggregate used to provide friction, seal cracks less than ¼ inches wide and preserve roadways. The modification provides resistance to higher ADT routes and provides for a relatively quick return to traffic. Life extensions of 6-7 years are seen.RS-1HM, HFE-100P, LMCRS-2H, PMCRS-2H, RS-1M, CRS-2S, CRS-1HM, CRS-1HP, CRS-2+, CRS-2HLM, CRS-2HP, CRS-2L, CRS-2P
Fog Seal - ConventionalA preservation technique that involves spraying a diluted asphalt emulsion onto an asphalt surface. Used to enhance aggregate retention and seal hairline cracks. Life extensions of 1-2 years are typical.CMS-1P, MS-2, CSS-1S
Fog Seal - High-PerformanceA light application of emulsion sprayed on the roadway surface, providing a quick return-to-traffic time and improved aggregate retention with trackless properties. Typical uses are over new chip seals, rejuvenating scrub seals and existing pavement surfaces — resulting in increased service life of 2-4 years.
Prime Coat - SolventlessAn ecologically friendly emulsion containing no petroleum solvents, providing a rapid cure that facilitates same-day paving.ePrime
Tack Coat - ConventionalA tack or bond coat is an application of emulsion or asphalt binder that is sprayed onto the roadway surface immediately prior to a paving operation. The adhesion of multiple lifts of pavement provides for maximum structural coefficient and ensures the safety and longevity of the pavement structure.PET, CSS-1, CRS-1HBC, CQS-1HP, CBC-1H
Spray Paver ApplicationA paving technique whereby the tack or bond coat material is applied through the paving equipment in a continuous operation. Contact your local salesperson for information on availability in your area.PMEM, EBL, CRS-1S
Click TreatmentDescriptionProducts
